The role of bit error analyzer in field maintenance and analysis of data lines
Bit error analyzer is an instrument that tests and analyzes bit error rate in communication systems and has simulation functions. It plays a vital role in field maintenance and analysis of data lines. Bit error rate testing is essentially to output a known data bit stream to the device under test, and then capture and analyze the data stream returned by the device under test.
The working principle of the 2M bit error analyzer is to convert the received digital signal into binary numbers and store it in a counter, and use a comparator to detect the bit error count results at different times, compare and analyze the number of bit errors in different time periods, and perform bit error analysis and management through a microprocessor. The system finally displays the number and nature of the bit errors on the device's display.
Its working principle can be divided into the following steps:
1. Signal transmission: 2M bit error meter simulates data transmission in digital communication system by sending predefined bit sequence signal.
2. Signal reception: 2M bit error meter receives the signal sent by the transmitter and converts it into an electrical signal that can measure the bit error rate.
3. Bit synchronization: The received signal is clock synchronized through the bit synchronization circuit to ensure the correct identification of the start and end of each bit
4. Bit error statistics: 2M bit error meter can calculate the number of bit errors at each bit position by comparing the received signal with the predefined bit sequence,
5. Bit error rate calculation: Divide the number of bit errors by the total number of bits sent to get the bit error rate, which is generally measured in bits per 100 million bits (bit) (Eror Bits per Hundred Miion BitsEB/HMDB).
6. Display results: The 2M BERT will display the measurement results to the user through the display screen or output interface so that the user can understand the bit error performance of the digital communication system.
In general, the 2M BERT evaluates the bit error rate in the digital communication system by sending analog signals, receiving and synchronizing signals, and counting and calculating the number of error bits. So, how does the 2M BERT affect the on-site maintenance and analysis of digital communication systems?
1. Detect and locate bit errors:
The bit error analyzer can detect the bit errors generated during data transmission, find the type and frequency of bit errors through statistics and analysis; through advanced digital signal processing technology, it can accurately calculate the bit error rate; it can also detect different types of errors, such as single bit errors, continuous bit errors, and non-continuous bit errors. This can help engineers quickly locate the problem and take corresponding repair measures.
2. Data link health status monitoring:
The bit error rate is directly related to the quality of communication. Through long-term bit error rate monitoring, the bit error analyzer can provide information about the health status of the data link. If the bit error rate increases, it may mean that the line is aging, interference or other potential problems, and timely maintenance is required.
3. Evaluate link performance:
The bit error analyzer can measure and evaluate the performance parameters of the data transmission link, such as bit error rate, signal attenuation and jitter; through the bit error rate test, the number of error bits in the transmitted data can be counted to calculate the bit error rate; through the continuous transmission test, it can detect whether errors occur during continuous transmission; through the frame error rate test, it is used to detect frame loss in data transmission. These parameters and test items are important indicators for measuring the quality of data links and can be used to evaluate the reliability and transmission capacity of links.
4. Verify network equipment:
The bit error analyzer can also be used to verify the performance of network equipment (such as routers, switches, fiber optic transceivers, etc.) to ensure that these devices do not introduce additional bit errors when transmitting data, thereby ensuring the stability and reliability of the entire network system.
5. Troubleshooting:
When a network failure occurs, the bit error analyzer can help engineers quickly troubleshoot and diagnose the root cause of the problem. For example, in network troubleshooting, if the bit error rate is high, engineers can use the bit error analyzer to find the specific transmission link and locate the fault point. The 2M bit error analyzer can help engineers quickly identify the problem and is a powerful tool for communication network maintenance and troubleshooting.
6. Quality verification of new and upgraded networks:
When building or upgrading a data network, using a bit error analyzer for testing can ensure that the new or upgraded network meets the design requirements and quality standards, help engineers determine whether the communication system meets the design requirements, and reduce the cost and time of future maintenance.
The bit error rate is directly related to the quality of communication. Therefore, the bit error analyzer is an indispensable tool for on-site maintenance and analysis of data lines. It plays a key role in judging the performance and quality stability of communication links in communication systems, and provides effective protection for ensuring high reliability and high quality of data transmission.
TFN T1000M series bit error analyzers can be used for on-site maintenance and analysis of E1/G.703 lines, as well as bit error testing of data lines (V.35, V.24/RS232, RS449, RS530, X.21). DTA-BERT is comprehensive in function and easy to operate. It can test according to international standards such as G.821, G.826 and M.2100, and can also store, count, analyze and print test data according to user requirements. It is an ideal tool for data line quality testing. There are three models:
T1000M/E 1 E1 port (unbalanced 75 ohm + balanced 120 ohm)
T1000M/C 1 E1 port + data port
T1000M/T 2 E1 ports + co-directional 64K port
If you are interested in TFN T1000 series E1 2M bit error analyzer, please contact TFN sales team:
Email: info@tfngj.com
WhatsApp: +86-18765219251
Facebook: https://www.facebook.com/tfnfate/