DG15M Cable Fault Tester

  TFN DG15M mainly for the market cable fault tester test is not anti-interference and the development of a high interference type cable fault tester, anti-interference channel using high interference design, high-voltage lines, transformers, cable trench environment to receive signals will not be interfered with.

  Highly anti-interference type DG15M tester is mainly used for 10KV level within the high and low voltage buried power cable disconnection, short-circuit, leakage faults to ground (insulation resistance to ground within 0.5 MΩ) of the localization of the buried cable depth, path direction detection.

  Product features include:

1, with a digital multimeter voltage ring resistance insulation test function is convenient to screen the fault line.

2, with length test function: support the test cable line breakage, short-circuit distance; can also test the total length of the cable line.

3, with a leakage detection function: for buried line insulation layer is damaged caused by the insulation is not good on the ground leakage fault location.

4, with path finding function: can easily query Hu buried cable accurate direction.

5、With manual test function: support manual setting interface, can manually set the range, gain, wave speed and other parameters.

6, with waveform comparison function: fault waveforms and good line waveform comparison to facilitate the location of the fault.

7, equipped with a signal generator: a setup interface, you can set the parameters (signal amplitude (1-99); signal frequency (500-2000Hz); signal type (sinusoidal, audio); launch mode (continuous and intermittent).                                          

8, anti-interference channel using high anti-interference design, high-voltage lines, cable trench environment to receive signals will not be interfered with.